The Mattress Cooler Air provides a cool fresh breeze to cool down at night. This simple and reliable system allows hot sleepers to cool down with a water-free, low-maintenance sleep cooling system. If you love the feel of a cool breeze the Mattress Cooler Air could be your key to sleeping better and saving energy.
Features:
- This simple and reliable system allows hot sleepers to cool down with a water-free, low-maintenance sleep cooling system
- The quiet and powerful Mattress Cooler Air with 3 fan speeds on the other hand can deliver the perfect amount of cool air exactly where you need it
- This cleans the air in your room while you sleep and ensures you are breathing fresh clean air all night long
- Breathing cool air into the lungs, and exhaling warm humid air is an important way for the body to cool itself when wrapped in a blanket and laying on a thick foam mattress
How it works:
Hot sleep is caused when body heat at 98.6° gets trapped between a thick foam mattress and modern bedding with no way to escape. The Mattress Cooler Air is our simple solution to a simple problem. Cool and dry room temperature air (70°-75°) is circulated through the covers absorbing excess body heat and flushing hot humid air out. It’s just that simple. Place the nozzle wherever you prefer your feet, back, face, arms whatever feels good to you.
Better than a ceiling fan:
through a room, they simply can’t penetrate through your covers at best you get a wisp of cool air across your cheek, and this simply is not enough to provide the cooling required. The quiet and powerful Mattress Cooler Air with 3 fan speeds on the other hand can deliver the perfect amount of cool air exactly where you need it.
Air Purifier Blower Fan:
simple one speed duct fan to an air purifier. Room air is filtered then accelerated through a flexible duct. This cleans the air in your room while you sleep and ensures you are breathing fresh clean air all night long.
Fresh Air for Side and Stomach Sleepers:
A common problem for side and stomach sleepers is that you will often trap and rebreathe pockets of exhaled air. This isn’t usually dangerous but it can have a big affect on body cooling and sleep cycles. Breathing cool air into the lungs, and exhaling warm humid air is an important way for the body to cool itself when wrapped in a blanket and laying on a thick foam mattress. The second issue is that the exhaled air has lowered oxygen content, and even more disturbing to sleep cycles a high CO2 concentration. After just a few breaths of high CO2 air, the brain will send strong signals to wake up, roll over, and take a deep breath. You won’t fully wake up but the quality of your sleep will be affected. If this is a problem for you, just position the nozzle in the right spot to blow a gentle stream of fresh cool air across your face.
Energy Savings:
The concept is simple leave your thermostat at 70°-75° at night and cool yourself directly with this simple cooler instead of cranking the AC down to 65°. You can easily save a few bucks of electricity per night and hundreds of dollars per year though obviously it depends on lots of variables like your house size, system efficiency, climate, and local electricity rates, so your results will vary.
Refrigeration not needed:
We tested several mini spot air conditioners with compressor cooling and found them unnecessary they add cost, complexity, noise, energy consumption and condensation issue. just a for a few extra degrees advantage. Most rooms are already in the low 70’s at night, and this 25° delta is more than enough to provide the cooling for nearly all hot sleepers.
Included in the box set:
- 1 Air Purifier / fan
- 1 Flexible Air Duct 36"
- 1 Duct Adapter Plate
- 1 Flexible/Soft Duct nozzle
The Andersons have been thinking about Mattress Coolers since Amanda was pregnant with their first child during the summer of 2007. Summer in Houston is always hot, but between being pregnant and working nights as a nurse, the only way she could get any sleep at all was to crank down the AC way down into the 60's.
Richard knew better than to touch the thermostat, but after getting the first electric bill of the summer, he built the first mattress cooler prototype with a deep freezer, a 5 gallon bucket of salt water, an aquarium pump, and a lot of tubing. It worked(to well...condensation soaked the bed)....but it wasn't quite ready for "Shark Tank"....The deep freezer quickly went back to the garage, and Richard grudgingly put a check in the mail for the electric bill.
Over the years they tried countless overpriced and poorly performing products before stumbling upon evaporative coolers, which it turns out are common in the rest of the world, but nonexistant in the US where the only products available were luxury products in the $1000+ price range....far too expensive for the subpar cooling they delivered.
Their first first thought was....there is no way that works...how could a small evaporative cooler that uses just a penny of electricity a night cool two people... but for the price, it was worth a shot, and the results blew them away....here was a product line already in mass production that worked, could be adapted to the US market by simply changing the plug, and best of all could be offered for under $200 retail.
Within a few months they had tested a dozen different samples and had an initial shipment on the way. They opened for business in 2016 and have spent the last 2+ years learning the ropes of online sales and international trade. By 2018 they knew they were onto something, but they also knew that there were improvements to be made in the product itself. Based on hundreds of reviews and conversations with customers they worked with manufacturer's to develop a new and improved model that directly addressed earlier model's shortcomings.
The result is the all new "Mattress Cooler" which we are extremely excited to be launching in the fall of 2018. The Mattress Cooler has quieter operation and a much larger water tank than previous models...addressing the top two issues with earlier models. It also has an in line filter, upgraded pump and fan, and a much sturdier heavy weight construction. Just as importantly... the price is unchanged....Mattress-Cooler.com's goal remains to help people sleep better and save money....we would much rather sell millions of these at razor thin margins than just a few at outrageous high prices.