Oxford Hotgrips EVO ATV Heated Grips with Thumbwarmer
The New Oxford Heaterz EVO - ATV heated handlebar grips with thumbwarmer are made especially for ATV's. These new EVO grips and thumbwarmer are Individually thermistor controlled, allowing the user to pick a set temperature between 95 - 115°F. Whether the chosen setting is 95, 100, 105, 110 or 115°F, the controller will apply Max power until this temperature is individually reached and measured by the thermistor in each grip and thumbwarmer. As each grip and thumbwarmer are constantly measured independently, the intelligent controller can apply more power to maintain the set temperature over both grips and thumbwarmer. With the added benefit of the new switch having separate heat channels (one for the two grips and one for the thumbwarmer), this removes the need to constantly adjust the heat settings.
The grips themselves have ergonomically engineered surface structures to optimize riding performance. Thicker rubber in areas of maximum wear; rhombus tread patterns for high levels of grip and feel; diamond tread pattern where maximum grip is required. What really sets the Oxford Heaterz apart? The answer is many tried and tested features such as the silicon cables which provide flexibility in the coldest weathers and the winter grade wiring prevents cracking and short circuits; the bonded grip design has been in use for many years and is well proven; the grip compound and thermo plastic rubber construction is designed to absorb vibration making them extremely comfortable and durable, often outlasting standard grips and the silicone wires that come from the grip are angled to eliminate water ingress and resulting corrosion/ice damage and have special unique internal supports which are heat shrunk together to prevent damage if the wires are snagged.
In addition, five carefully chosen heat settings allow the perfect temperature to be selected in All weathers and most importantly, the switch will turn off if the voltage drops below 13.5V to ensure that the battery is not flattened or damaged. This latest addition to the range is the result of over 35 years of research and development by engineers and motorcyclists, which are now easier than ever to fit due to the new intelligent heat controller eliminating any need to wire the positive to a live ignition feed; simply connect the 2 ring connectors to the battery. You'll find everything supplied by Oxford to fit your Heaterz from a wiring loom with ring connectors to the battery with simple plug and play waterproof connectors to attach to the switch and grips, smart mounting bracket and switch right down to the glue and cable ties all neatly packaged in one box.
These EVO ATV Heaterz are designed as a replacement for the handlebar grips already fitted to the ATV. They will fit onto most ATV's that use 7/8" (22mm) Ø handlebars. The standard length of the Evo ATV Heaterz grip is 5.12" (130mm). Should the length need to be shortened, they can be trimmed to a minimum length of 4.72" (120mm) without damaging the heating elements. External grip Ø = 1.35" (34.2mm).
Specifically for the ATV version; dual channel temperature settings allow the Thumbwarmer temperature to be set separately from both grips. As it is a smaller surface area, it typically would run hotter than the grips.
- Sealed for life
- Up to 115°F (46°C)
- Rainproof switch
- Draws under 4A
- 5 heat settings give the perfect operating temperature with LED lights to indicate the level
- Miniaturized electronics
- Robotized manufacturing
- Simpler wiring
- Sonically welded
- Waterproof connectors
Welcome to Oxford Products USA
The company behind Oxford Essential Rider Equipment, the US subsidiary of Oxford Products Ltd, the UK's leading supplier of motorcycle and cycle accessories exporting to over sixty distribution partners worldwide.
Established in 1973 by the current Chairman and employing around ninety staff, this family run company has recently enjoyed strong growth both organically and through diversification into new markets, culminating with the proud opening of our US headquarters in Jacksonville, Florida in November 2012. Providing national support to its current US distribution partners and dealer network, the mission of Oxford Products USA Inc. is to ensure the company’s burgeoning motorcycle and accessories range is easily accessible to every consumer in the United States of America.
The company’s market-leading motorcycle accessories and parts are designed at our purpose-built 100,000 sq ft Oxfordshire, UK headquarters by a team of active enthusiasts who test and develop the range. Their experience in developing products which can withstand the rigors of life on two wheels throughout the World enables us to offer the best advice, knowledge and service to our customers.
When you choose Oxford Essential Rider Equipment, you get motorcycle accesories which are tried, tested and guaranteed to provide quality, durability and usability. Enjoy browsing through our catalogue of extensive parts and accessories and we sincerely hope to have the opportunity to look after you as a valued customer in the same way as we have been doing for motorcycle riders for the past 40+ years !
Related Items Heated Motorcycle Grips
- Oxford Heaterz Cruisers
- Oxford Hotgrips EVO Sports Heated Grips
- Oxford Hotgrips EVO Touring Heated Grips
- Oxford Heaterz Premium - ATV Heated Grips with Waterproof Connectors
- Oxford Hotgrips EVO Adventure Heated Grips
- Oxford Heaterz Essential Commuter - Heated Grips (Discontinued)
- Oxford Hotgrips EVO ATV Heated Grips with Thumbwarmer
- Oxfrod Hotgrips EVO V9t Heat Controller - ATV
- Oxford Heaterz V8R Heat Controller with Waterproof Connectors
- Oxford Hotgrips EVO V9 Heat Controller - Motorcycle
- Oxford Heaterz Premium Touring - Heated Grips
- Oxford Heaterz Premium Cruiser - Heated Grips