Vornado SRTH Small Tower Heater - Black
The Vornado SRTH effectively circulates heat, without the need for oscillation, using V-Flow heat circulation. By passing the heat through specially contoured louvers, the SRTH distributes the heated air in a wide, V-shaped pattern that creates a more consistently comfortable space. This wide, powerful airflow is superior to oscillating heaters that create unbalanced heat output and leave hot and cold spots in the room. The SRTH gives you simple control providing 2 heat settings, 4-hour auto shut-off timer and a continuous fan-only setting for year-round use. The SRTH is equipped with a host of safety features, including a tip over switch, automatic safety shut off if airflow becomes obstructed, a sturdy, non-oscillating base, and an exterior that stays cool to the touch, even after hours of operation.
- Signature V-Flow Heat Circulation
- No Oscillation For More Consistent Heat
- 2 Heat Settings
- 4-Hour Auto Shut-Off Timer
- Continuous Fan-Only Setting
- Automatic Safety Tip Over Switch
- Overheat Shut-Off Protection
- 5 Year Warranty
- Warranty: 5 year
- Heat Settings: Low/High
- Item Weight: 2.88 lbs.
- Item Height: 12.45 in.
- Item Depth: 6.15 in.
- Item Width: 6.01 in.
- Heat Regulation: None
- Remote: No
- High Heat Watts: 900
- Low Heat Watts: 450
- High Exit Air Temperature: 140
- Low Exit Air Temperature: 110
- High Heat Amps: 7.3
- Low Heat Amps: 3.65
- Hertz: 60 HZ
- Volts: 120
- PowerCord Length: 6 ft.
- PowerCord Plug Type: 2-Pin Polarized
"Leaders in air flow technology." Beyond a marketing message- this statement defines Vornado's past, and charts the course for the company's future. The Vornado story begins with an inventor's vision to improve aircraft design in the early 1920's. Ralph K. Odor began to experiment with unique aerodynamics that increased the efficiency and performance of standard propeller planes. After many patents and highly successful prototypes, Ralph realized that his findings could change the inefficient electric fan designs that dominated the industry at the time. Ralph met O.A. Sutton, an entrepreneur from Wichita, Kansas and refined his concept for a new "air circulator." Initial plans to build the new "Vornado" fans were delayed by the complete focus of manufacturing resources needed to support World War II.
As the war drew to a close in the mid to late 1940's, the O.A. Sutton Company produced the first Vornado fans. These fans were well received, differentiated from other brands with their unmatched power and unwavering performance. The early "Vornados" served as the foundation for the company's reputation for innovation, product performance and durability.
In the years following the Second World War, air conditioning became increasingly accessible to the average American. Many believed "fans" were destined to move from living rooms to museum display cases - a relic of a bygone era. This would not be the case, as it was made clear throughout the decades that any climate control system could be supplemented and improved with the use of high performance fans or heaters. After a generation full of innovations, Vornado was about to completely reestablish customers' expectation of what a "fan" could do. Like the jet engine following the propeller, "fans" were destined to be promoted to a new level of performance.
In 1989, a new Vornado company was founded in Andover, Kansas - a suburb of Wichita, known as a worldwide hub for aviation design and manufacturing. Inspired by the advanced propeller and jet engine designs that were common products of the community, Vornado engineers created the first "whole room circulator"- taking the traditional fan beyond its previous limitations. These "circulators" benchmarked the successful design behind the Vornados of the 1940's and improved upon it- adding leading edge design, engineering and materials to the equation - with truly remarkable results. Vornado's unparalleled performance can be traced to its signature vortex action; the result of four proprietary components found only within Vornado technology. Initially applied to air circulators and heaters, Vortex Action allowed for Vornado products to affect not just the air around the unit like traditional fans and heaters, but to evenly distribute all of the air throughout an entire room. The effectiveness of these first products propelled the new Vornado back into the position as a leader in air comfort products.
Extensive research and development demonstrated that "Vortex Action" could dramatically impact the performance of other products beyond air circulators and heaters. The same principles that create even distribution of air and temperature are the drivers behind the company's newest offerings. Vortex action elevates a Vornado Humidifier's ability to evenly distribute moisture levels throughout a room. Because air cannot be filtered unless it is first moved, Vortex action makes Vornado's Whole Room Air Purifiers uniquely effective.
The same revolutionary thinking that created a superior fan has been poured into every aspect of Vornado's offerings today. Safer. Quieter. More intuitive. More effective. These aren't just goals for each new Vornado product, these are requirements. Vornado has demonstrated leadership in the past, and Vornado understands that leadership can only be maintained by relentless innovation. Expect more from Vornado. Company engineers are creating the next generation of products that will continue to raise performance standards in a wider bandwidth of consumer product areas. From our ever growing Andover headquarters, American engineers innovate, and American workers painstakingly research, build, test then deliver. Customers can expect to see the most progressive Vornado products ever introduced - but amidst all of this innovation, one thing will never change; Vornado will forever stand for unmatched performance, continuing its legacy as a Leader In Air Flow Technology.